Motul 8100 X-Clean Plus 5W-30 Synthetic Motor Oil - 5 Liters
Type: 3374650-257723 / 5W-30 100% Fully Synthetic
Application: Gasoline & Diesel lubricant - Euro IV & V
Specifications: API SM/CF ACEA C3
OEM Approvals: BMW LL-04, MB-Approval 229.31 / 229.51, Porsche C30, VW / Audi 504 00 / 507 00
Volume: 5 Liters
Recommendations: Motul 8100 X-clean+ 5W-30 100% synthetic lubricant (Mid-SAPS) is specially designed for Diesel Particulate Filters (DPF) and Three Way Catalytic converters. Any car powered by turbo Diesel direct injection or gasoline engines, EURO IV and EURO V emission regulation compliant.
Motul 8100 X-clean+ 5W-30 100% synthetic lubricant is specially designed for latest generation of Diesel and Gasoline engines, EURO IV or EURO V emission regulation compliant, requiring an engine oil with high HTHS (3.5 mPa.s) viscosity and Mid SAPS with reduced content of sulfated ash (0.8%), phosphorus (0.07 x 0.09%) and sulfur (0.3%).
Compatible with catalytic converters and Diesel Particulate Filters (DPF). Particularly suitable for the latest generation of BMW, MERCEDES, PORSCHE and VAG (VW, AUDI, SEAT, SKODA) cars.
Suitable also for any type of Diesel or Gasoline engines calling for ACEA C3 lubricant. Before use always refer to the owner manual or handbook of the vehicle.
Engines compliant with EURO IV and EURO V emission regulation are fitted with sensitive exhaust gas after treatment systems. Indeed, Sulfur and Phosphorus inhibit catalytic converters operation leading to inefficient exhaust gas treatment; and Sulfated Ashes clog DPFs leading to shorten regenerating cycle, quick oil aging, higher fuel consumption and engine power loss.
The BMW Long Life-04 specification imposes severe constraints to the lubricant particularly due to Valvetronic and after treatment systems compatibility. It covers all BMW engines from 2004 and also all BMW engines before 2004 as BMW LL-04 covers all the previous BMW specifications such as BMW LL-98 and BMW LL-01.
The MB 229.51 requires among many other severe constrains from the lubricant a reduced content of Sulfted Ash, Phosphorus and Sulphur in order to be compatible with MERCEDES exhaust gas after treatment systems. These oils can reach flexible drain intervals managed by computer on board due to outstanding shear resistance properties. The specification MB 229.51 applies to some MERCEDES Gasoline engines, and to all MERCEDES Diesel engines, with or without DPF.
PORSCHE has introduced its C30 norm to guarantee the perfect lubrication of all their Diesel engines and V6 Gasoline engines (Porsche Cayenne). Approved PORSCHE C30 lubricant fulfills all these highly demanding requests especially regarding oil film resistance.
VOLKSWAGEN for their VW 504 00 and VW 507 00 standards requires from the lubricant to be fully compatible with their after treatment systems such as catalytic converters and DPFs to ensure the highest durability of most Gasoline and Diesel engines of VW, AUDI, SEAT and SKODA vehicles.
MOTUL 8100 X-clean+ 5W-30 fully answer all those various requests that BMW, MERCEDES, PORSCHE and VW have developed for their lubricant standards through engine oils with high HTHS (3.5 mPa.s), reduced Sulphated Ash, Phosphorus and Sulfur content (Low SAPS), suitable for use with modern exhaust gas after treatment systems.
ATTENTION: BMW LL-04 product can be used for gasoline engines only in European Union countries, Switzerland, Norway and Liechtenstein. Outside those countries, a BMW LL-01 lubricant such as Motul 8100 X-cess 5W-40 is required. Please refer to BMW recommendation.
Motul products are all API and SAE approved with the latest certifications. Using the correct application of Motul product will not void the vehicle's factory warranty.
Motul has risen above existing standards by developing products based on unconventional technologies like the Double Esters of the 300V range for cars and motorcycles or else the amine-free and boric acid-free technologies used in the aeronautics industry for machining titaniums.